Analogue Addressable Detector Base

TrueAlarm detector bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric, ionisation, or heat detectors. Each detector’s output is digitised and transmitted to the system CIE every four seconds. Since TrueAlarm detectors use the same base, different detector types can be easily interchanged to meet specific location requirements, for example, during building construction, or when conditions are temporarily dusty. Instead of covering the smoke detectors(causing them to be disabled), heat detectors may be installed without reprogramming the CIE. Although the CIE will indicate an incorrect detector type, the heat detector will operate at a default sensitivity maintaining building protection at that location.

 

*MAPNET II or IDNet auto select

Details

Part No. 4098-9789EA

Operating Voltage 24 to 40Vdc*
Quiescent Current (max) 400µA
Alarm Current (max) 3.2mA
Relative Humidity 10% to 95% (n/cond)
Ambient Temperature 0 to +55°C
Dimensions 124 dia x 35mm
ActivFire Listed afp-1225 & 1246

Related Products

Smoke Detector Cages

The STI-8200-SS Series smoke detector cages are available in flush...

Wire Guard

W500 Series detector cages are available in a range of...

SR-90 – The Intelligent System for Physical Speed Reduction

SR-90 is a smart system for speed reduction of vehicles...

SR-BALI-BASE

SR-BALI-BASE is a cutting-edge product that allows the installation of...